An Omni home control system takes the place of a standard security system. It features built-in UL Listed, CP-01 compliant security and fire systems to detect intrusion, smoke and fire, carbon monoxide, water and other hazards through wired and wireless sensors.

It provides the ultimate in safety for your family with features not found in a standard security system such as inside and outside lights turning on in the event of a security alarm, or the air conditioner automatically turning off in the event of a fire to prevent the spreading of smoke throughout the home.

An Omni home control system may be personalized to notify you by the telephone, e-mail, Internet surveillance or by central monitoring of an alarm event. Not only can you call or log in to the Internet to check or change the security, temperature, or light settings, the system can call or e-mail you alerts. Have your system call you when your children have arrived home from school or if the alarm has gone off. Also, the system is proven reliable, as back-up battery resources ensure security even during a power loss.

On vacation and worried about the safety of your home? Want to check up on children, elderly relatives, or pets from your office? View live cameras or record footage to be viewed at your convenience.

HAI offers an indoor/outdoor IP camera, two high quality analog cameras, a Network Digital Video Recorder (NDVR), and an HAI Camera Server. The NDVR allows you to record footage based upon time, event, or motion. The Camera Server lets you convert analog camera signals to IP video streams, letting you view them via its embedded web server. You need neither the NDVR nor the Camera Server to view video if using the IP camera.

Mezuri uses HAI's survellance products in stand-alone installations or integrated with an HAI home control system.

Expand Your Benefits with an HAI Home Controller

Cameras can be viewed on all OmniTouch Touchscreens, over the Internet, or on your Smartphone. When the front door bell rings or motion is detected in the pool area or driveway, the video feed can automatically appear on a Touchscreen or TV in your home.

HAI C3 (Cellular Communication Center)

The HAI C3 (Cellular Communication Center) can communicate alarm conditions using a GSM cellular network when the land line or cable phone service has been cut.

HAI’s Surveillance products let you view and record video of events at your home. Consider HAI’s Access Control products to limit gate or pool access and the convenience of automation and security features activated by the swipe of a card.

The security features of the Omni system also act as the eyes and ears of your home to initiate other automation functions, such as lighting scenes or temperature changes based on motion or door openings.

The HAI C3 (Cellular Communications Center) is a wireless cellular communicator that allows phone calls to be made over the GSM cellular network using the existing telephones in your home. The HAI C3 can be used when there is no land line in your home or if the land line is temporarily unavailable.

The HAI C3 is perfect for homeowners without land lines, vacation homes, and locations that need remote monitoring. It provides better sound quality than regular cell phones because the attached antenna is better and more powerful than the one on a cell phone.

Security Backup

The HAI C3 works with any standard security panel, including HAI's Omni family of home controllers, to communicate alarm conditions using the GSM cellular network when the land line or cable phone service has been cut. The HAI C3 checks the status of the existing PSTN telephone line and if it is unavailable, the HAI C3 will emulate the line signal to the security panel. When an alarm occurs, the security panel will dial out using the GSM cellular network to communicate with the central monitoring station and the central monitoring station will be able to call your home through the C3 to verify the alarm condition.

The HAI C3 ships with an included backup battery in case the power goes out.

How It Works

There is no programming involved with the HAI C3.

Regular telephones connected to the HAI C3 can be used to make calls. If a land line is present, you will hear the normal dial tone and you can make your call as normal using the land line service. However, if the land line is currently unavailable, you will hear a different tone which indicates the HAI C3 is in cellular mode and the call will be made using the cellular network.

If the land line is available, but you still want to make the call using the cellular network, when you pick up the phone and hear the normal dial tone, press the * key on the phone and the HAI C3 will switch to GSM mode. At that point, you will hear the cellular mode tone and you can make the call using the GSM cellular network. When a call is made to the phone number assigned to the GSM SIM card installed in the HAI C3, any phones that are connected to the HAI C3 will ring as they normally would when a land line call is received.

Note that due to the limitations of cellular service, the HAI C3 does not work with faxes or modems. The HAI C3 will work with regular home telephones, speakerphones, and answering machines.

Requirements

The HAI C3 requires a GSM SIM card and cellular service. The major GSM players in the United States are AT&T, T-Mobile, and prepaid carriers. Customers with existing GSM accounts can add a line to their cellular account for a reasonable charge and plug the added phone SIM into the HAI C3.